530-MIL Military Series Inflatable Boat


We now offer our Military and Professional range of craft. The Military series is one of our most respected inflatable boats. Recently, the series has gone through extensive upgrades, further enhancing its durability. Suitable for a wide range of applications, it is easy to see why the Military Series if the choice for multiple professionals.

The new features of this boat include an increase in material thickness, We are now producing 1.5mm material thinckness for our tubes, compared to the standard models at only .9mm. We even went a step further in creating a secondary layer that runs the length of the tube bottoms. This gives a total of 3mm of material for running up on the rocky beaches. All our Professional series have 6 air chambers standard. Safety and keeping you afloat is priority one for Inmar Marine. Our Military Series boats are designed to be functional, durable and versatile. Two people can assemble most of our models and have the craft operational in less than 20 minutes.


  • Length 17′ 5″
  • Beam 6′ 8″
  • Hull Weight 325 lbs (aluminum floor)
  • Capacity: 10 persons (2980 lbs)
  • Motor Max: 60 hp (Long shaft) recommended: 40 hp
  • Engine weight: 240 lbs max
  • Tube Diameter 22″ (Separate Air Chambers 6 + 1)
  • Inside width 3′ 5″
  • Folded dimensions 2’11″x5’7″
  • Fabric: Hypertex, Polyester,1.5 mm mesh fabric, tensile strength: 3800, Tear strength: 500 newtons, dual coated. Material provides UV protection, is airtight in water and highly resistant to abrasions, salt water and fuel.
  • Tested against 1000 hours of UV and salt corrosion
  • Factory Warranty: 3 years recreational / 1 year commercial

Standard Features:

  • Non-skid aluminum floor with anodized aluminum stringers
  • Marine plywood transom, black
  • Aluminum engine mounting plate
  • Reinforcement on tube transom attachments
  • Standard self bailers with Pop-up release
  • All around rub strake, flat profile, black
  • Rubbing strakes for beaching on keel and tubes
  • Eight Carry handles, Soft handle non-slip
  • Bow handle (Stainless)
  • Exterior/Interior lifelines (peripheral)
  • Fifteen Interior tie down D-rings (Stainless Steel)
  • Reinforcing seat patches on tubes
  • Two large tow rings on bow (Stainless Steal)
  • Two large tow rings on rear tubes(Stainless Steal)
  • Overpressure valves set at 3.2psi

Included Accessories:

  • Foot pump w/gauge
  • Field Repair kit
  • Storage Bags, Bow bag
  • Collapsible oar set