530-MIL Military Series Inflatable Boat

 

We now offer our Military and Professional range of craft. The Military series is one of our most respected inflatable boats. Recently, the series has gone through extensive upgrades, further enhancing its durability. Suitable for a wide range of applications, it is easy to see why the Military Series if the choice for multiple professionals.

The new features of this boat include an increase in material thickness, We are now producing 1.5mm material thinckness for our tubes, compared to the standard models at only .9mm. We even went a step further in creating a secondary layer that runs the length of the tube bottoms. This gives a total of 3mm of material for running up on the rocky beaches. All our Professional series have 6 air chambers standard. Safety and keeping you afloat is priority one for Inmar Marine. Our Military Series boats are designed to be functional, durable and versatile. Two people can assemble most of our models and have the craft operational in less than 20 minutes.

Specifications:

  • Length 17′ 5″
  • Beam 6′ 8″
  • Hull Weight 325 lbs (aluminum floor)
  • Capacity: 10 persons (2980 lbs)
  • Motor Max: 60 hp (Long shaft) recommended: 40 hp
  • Engine weight: 240 lbs max
  • Tube Diameter 22″ (Separate Air Chambers 6 + 1)
  • Inside width 3′ 5″
  • Folded dimensions 2’11″x5’7″
  • Fabric: Hypertex, Polyester,1.5 mm mesh fabric, tensile strength: 3800, Tear strength: 500 newtons, dual coated. Material provides UV protection, is airtight in water and highly resistant to abrasions, salt water and fuel.
  • Tested against 1000 hours of UV and salt corrosion
  • Factory Warranty: 3 years recreational / 1 year commercial

Standard Features:

  • Non-skid aluminum floor with anodized aluminum stringers
  • Marine plywood transom, black
  • Aluminum engine mounting plate
  • Reinforcement on tube transom attachments
  • Standard self bailers with Pop-up release
  • All around rub strake, flat profile, black
  • Rubbing strakes for beaching on keel and tubes
  • Eight Carry handles, Soft handle non-slip
  • Bow handle (Stainless)
  • Exterior/Interior lifelines (peripheral)
  • Fifteen Interior tie down D-rings (Stainless Steel)
  • Reinforcing seat patches on tubes
  • Two large tow rings on bow (Stainless Steal)
  • Two large tow rings on rear tubes(Stainless Steal)
  • Overpressure valves set at 3.2psi

Included Accessories:

  • Foot pump w/gauge
  • Field Repair kit
  • Storage Bags, Bow bag
  • Collapsible oar set

 

470-MIL Military Series Inflatable Boat

 

We now offer our Military and Professional range of craft. The Military series is one of our most respected inflatable boats. Recently, the series has gone through extensive upgrades, further enhancing its durability. Suitable for a wide range of applications, it is easy to see why the Military Series if the choice for multiple professionals.

The new features of this boat include an increase in material thickness, We are now producing 1.5mm material thickness for our tubes, compared to the standard models at only .9mm. We even went a step further in creating a secondary layer that runs the length of the tube bottoms. This gives a total of 3mm of material for running up on the rocky beaches. All our Professional series have 6 air chambers standard. Safety and keeping you afloat is priority one for Inmar Marine.

Our Military Series boats are designed to be functional, durable and versatile. Two people can assemble most of our models and have the craft operational in less than 20 minutes.

Specifications:
  • Length 15′ 5″
  • Beam 6’8″
  • Hull Weight 275 lbs (aluminum floor)
  • Capacity: 9+1 persons (2640 lbs)
  • Motor Rating 50 hp (long shaft) 225 lbs
  • Tube Diameter 20″ (Separate Air Chambers 6 + 1)
  • Inside width 2’11”
  • Folded dimensions 2’6″x4’11”
  • Fabric: Hypertex, Polyester,1.5 mm mesh fabric, tensile strength: 3800, Tear strength: 500 newtons, dual coated. Material provides UV protection, is airtight in water and highly resistant to abrasions, salt water and fuel.
  • Tested against 1000 hours of UV and salt corrosion
  • Factory Warranty: 3 years recreational / 1 year commercial
Standard Features:
  • Non-skid aluminum floor with anodized aluminum stringers
  • Bow floorboard, wood, black
  • Marine plywood transom, black
  • Aluminum engine mounting plate
  • Reinforcement on tube transom attachments
  • Standard Pop-up self bailers (internal release)
  • All around rub strake, flat profile, black
  • Rubbing strakes for beaching on keel and tubes
  • Eight Carry handles, Soft handle neoplrene covered nylon
  • Bow handle (Stainless)
  • Exterior/Interior lifelines (peripheral)
  • Fifteen Interior tie down D-rings (Stainless Steel)
  • Reinforcing seat patches on tubes
  • Two large tow rings on bow (Stainless Steal)
  • Two large tow rings on rear tubes(Stainless Steal)
  • Foot pump with hose & Guage (1) included
  • Repair kit (1) included
  • Storage Bags, floor (1) hull (1), Bow bag (1)
  • Paddle set (alum. Shaft, plastic blade)

 

430-MIL Military Series Inflatable Boat

 

We now offer our Military and Professional range of craft. The Military series is one of our most respected inflatable boats. Recently, the series has gone through extensive upgrades, further enhancing its durability. Suitable for a wide range of applications, it is easy to see why the Military Series if the choice for multiple professionals.

The new features of this boat include an increase in material thickness, We are now producing 1.5mm material thinckness for our tubes, compared to the standard models at only .9mm. We even went a step further in creating a secondary layer that runs the length of the tube bottoms. This gives a total of 3mm of material for running up on the rocky beaches. All our Professional series have 6 air chambers standard. Safety and keeping you afloat is priority one for JP Marine.

Our Military Series boats are designed to be functional, durable and versatile. Two people can assemble most of our models and have the craft operational in less than 20 minutes.

Specifications:
  • Length 14′ 0″
  • Beam 6′ 5″
  • Hull Weight 253 lbs (Aluminum Floor)
  • Hull Weight 253 lbs (Wood Floor)
  • Capacity: 8 persons (2395 lbs)
  • Motor Rating 40 hp (short shaft)
  • Tube Diameter 20″ (Separate Air Chambers 6 + 1)
  • Fabric: Hypertex, Polyester,1.5 mm Coated fabric, tensile strength: 3800, Tear strength: 500 newtons, dual coated. Material provides UV protection, is airtight in water and highly resistant to abrasions, salt water and fuel.
  • Tested against 1000 hours of UV and salt corrosion
  • Factory Warranty: 3 years recreational / 1 year commercial
Standard Features:
  • Non-skid aluminum floor with anodized aluminum stringers
  • Bow floorboard, wood, black
  • Marine plywood transom, black
  • Aluminum engine mounting plate
  • Reinforcement on tube transom attachments
  • Standard Pop-up self bailers (internal release)
  • All around rub strake, flat profile, black
  • Rubbing strakes for beaching on keel and tubes
  • Eight Carry handles, Soft handle neoplrene covered nylon
  • Bow handle (Stainless)
  • Exterior/Interior lifelines (peripheral)
  • Fifteen Interior tie down D-rings (Stainless Steel)
  • Reinforcing seat patches on tubes
  • Two large tow rings on bow (Stainless Steal)
  • Two large tow rings on rear tubes(Stainless Steal)
  • Foot pump with hose & Guage (1) included
  • Repair kit (1) included
  • Storage Bags, floor (1) hull (1), Bow bag (1)
  • Paddle set (alum. Shaft, plastic blade)

380-MIL Military Series Inflatable Boat

We now offer our Military and Professional range of craft. The Military Series is one of our most respected inflatable boats. Recently, the series has gone through extensive upgrades, further enhancing its durability. Suitable for a wide range of applications, it is easy to see why the Military Series if the choice for multiple professionals.

The new features of this boat include an increase in material thickness. We are now producing 1.5mm material thickness in all high abrasion areas, compared to the standard models at only .9mm. We even went a step further in creating a secondary layer that runs the length of the tube bottoms. This gives a total of 3mm of material for running up on the rocky beaches. All our Professional series have 6 air chambers standard. Safety and keeping you afloat is priority one for JP Marine.

Our Military seriesĀ® boats are designed to be functional, durable and versatile. Two people can assemble most of our models and have the craft operational in less than 20 minutes.

Specifications:

  • Length: 12′ 5″
  • Beam: 6′ 0″
  • Capacity: 6 persons (1720 lbs)
  • Motor Rating: 30 hp (short shaft) / 20 hp recommended
  • Weight: 216 lbs (Aluminum Floor)
  • Tube Diameter: 18″ (Separate Air Chambers 5 + keel) Fabric: Hypertex, Polyester,1.2mm / 1.5 mm Highly resistant to abrasions, salt water and fuel.
  • Tested against 1000 hours of UV and salt corrosion
  • Factory Warranty: 3 years recreational / 1 year commercial

Standard Features:

  • Non-skid aluminum floor with anodized aluminum stringers
  • Bow floorboard, wood, black
  • Marine plywood transom, black
  • Aluminum engine mounting plate
  • Reinforcement on tube transom attachments
  • Standard Pop-up self bailers (internal release)
  • All around rub strake, flat profile, black
  • Rubbing strakes for beaching on keel and tubes
  • Eight Carry handles, Soft handle neoplrene covered nylon
  • Bow handle (Stainless)
  • Exterior/Interior lifelines (peripheral)
  • Fifteen Interior tie down D-rings (Stainless Steel)
  • Reinforcing seat patches on tubes
  • Two large tow rings on bow (Stainless Steal)
  • Two large tow rings on rear tubes(Stainless Steal)
  • Foot pump with hose & Guage (1) included
  • Repair kit (1) included
  • Storage Bags, floor (1) hull (1), Bow bag (1)
  • Paddle set (alum. Shaft, plastic blade)

 

380-MIL-L Military Series Inflatable Boat

The Military Series (Rapid Response) models feature a new quick roll out system. The ability to deploy on-site, and fully stow-able rescue solution. Suitable for a wide range of applications. The new features of this boat include a non-skid soft traction flooring, and increase in material thickness. We are now producing 1.2mm tubes, compared to the industry standard models at only .9mm. We even went a step further in creating a secondary layer that runs the length of the tube bottoms. This gives a total of 2.4mm of material for running up on the rocky beaches. All our Professional series have 6 air chambers standard. Safety and keeping you afloat is priority one for Impact Inflatables.

Our Military Series boats are designed to be functional, durable and versatile. Two people can assemble and deploy onsite in less than 10 minutes with optional quick fill kit.

Specifications:
  • Length 12′ 5″
  • Beam 6′ 0″
  • Hull Weight 175 lbs
  • Capacity: 5+1 persons (1750 lbs)
  • Max Motor Rating 25 hp ( recommended 20 hp )
  • Engine shaft length 15″ (short shaft)
  • Tube Diameter 18″ (Separate Air Chambers 5 + 1)
  • Fabric: Hypertex
  • Factory Warranty: 3 Years recreational, 1 Year commercial
Standard Features:
  • High pressure roll out floor system (Rapid Deploy)
  • Diver recovery entry / exit points
  • Non-skid soft traction covering
  • Marine plywood transom, black
  • Solas reflective panels (High night visibility)
  • Aluminum engine mounting plate (Heavy Duty)
  • Reinforcement on tube transom attachments
  • Standard self bailer with plug (Pop-up design)
  • All around rub strake, flat profile, black
  • Rubbing strakes for beaching on keel and tubes
  • Carry handles, Non slip design
  • Bow handle (Stainless)
  • Transom “D” lifting rings (Stainless Steel)
  • Exterior/Interior lifelines (peripheral)
  • Fifteen Interior tie down D-rings (Stainless Steel)
  • Two large tow rings on bow (Stainless Steal)
  • Two large tow rings on rear tubes(Stainless Steal)
  • Foot pump with integrated gauge
  • Field Repair kit
  • Storage Bags, Bow bag
  • Paddles (alum. Shaft, plastic blade)

Optional Equipment:

  • Quick-Fill field inflation system (SCUBA or SCBA)
  • Scuppers Set (High volume water drainage)
  • Custom Lettering ($10 per letter installed)